Hitachi RCI-1.0FSN4 Service Manual page 102

2 Unit installation
Optional accessories
Example of 3-Way Outlet
RCI-(1.0-1.5)FSN4
RCI-(2.0-6.0)FSN4
Example of 2-Way Outlet
The air outlet directions can not be selected other than the figure below. (If other air outlet directions are selected, dew
condensation may occur.)
RCI-(1.0-6.0)FSN4
*1 Change the position of the outlet temperature thermistor. If not, the room temperature adjustment may not be
available.
*2 In the case of Example 3, the air flow volume will decrease compared with other cases. Set the high speed setting.
Example for 3-Way and 2 Way Outlet
• Near the Wall: 3-Way Outlet Near the wall: 3-way outlet • Near the Wall: 3-Way Outlet • Near the Wall: 3-Way Outlet
88 SMGB0099 rev.0 - 12/2016
Blocking Part
1 (*1) 2
Piping side
Unuse
Use
380 340
380 440
1
Piping side
Refer to the item (1) 3-Way Outlet
plate of each model
• In a Corner: 2-Way Outlet • In a Corner: 2-Way Outlet In a corner: 2-way outlet • In a Corner: 2-Way Outlet
Use Part of Blocking Plate
3
Cut off
the corner
340 340
Cut off
the corner
470 435
Blocking Part
2 (*1) 3 (*2)
for the size of blocking
• In Rectangular Room: 2-Way Outlet • In Rectangular Room: 2-Way Outlet • In Rectangular Room: 2-Way Outlet In rectangular room: 2-way outlet
4