Hitachi RCI-1.0FSN4 Service Manual page 229

6 Optional functions
Optional functions through Remote control
Elem. Optional function
Operating mode change
H3
restriction
Central Equipment
Operation during Forced
Stop
H4
KPI: Operating modes for
the ventilation unit with
energy recovery
J1 Not available
J2 Not available
J3 Run indicator color
J4 Not available
J5 Not available
J6 Not available
J7 Not available
J8 Eco-operation
(6)
J9 Not available
JA Not available
Jb Not available
K1 Not available
K2 Not available
K3 Not available
K4 Not available
215 SMGB0099 rev.0 - 12/2016
Individual
Settings
setting
Operating mode change disabled
00
(factory setting)
Operating mode set by the
01
central control + FAN mode
O
02 Unlimited operating mode
00 Not activated function
O
01 Activated function
00 Air conditioning only
01 Ventilation only
O
02 Air conditioning + ventilation
00 Not activated function
–
01 Activated function
00 Not activated function
–
01 Activated function
00 Green
–
01 Red
00
Not available
X 01
(Use as 00 conditions)
02
00
Not available
–
(Use as 00 conditions)
01
00
Not available
–
(Use as 00 conditions)
01
00
Not available
–
(Use as 00 conditions)
01
00 Not activated function
X
01 Activated function
00
Not available
–
(Use as 00 conditions)
01
Not available
– –
(Use as 00 conditions)
00
Not available
–
(Use as 00 conditions)
01
Not available
– –
(Use as 00 conditions)
Not available
– –
(Use as 00 conditions)
Not available
– –
(Use as 00 conditions)
Not available
– –
(Use as 00 conditions)
Setting conditions
This function is used to configure
restrictions to the HEAT mode.
Not available for models:
RPI-FSN3(P)E
RPC-FSN3E
RPF(I)-FSN2E
RCIM-FSN4(E)
RCD-FSN3
Not available for models:
RPI-FSN3(P)E
RPC-FSN3E
RPF(I)-FSN2E
RCIM-FSN4(E)
RCD-FSN3
This function is only available for the
ventilation unit with energy recovery.
Not available for models:
RPI-(8.0-20.0)FSN3(P)E(-f)
RPC-(3.0-6.0)FSN3E
RPF(I)-(1.0-2.5)FSN2E
Not available for models:
RPI-(8.0-20.0)FSN3(P)E(-f)
RPC-(3.0-6.0)FSN3E
RPF(I)-(1.0-2.5)FSN2E
Not available for models:
RPI-(8.0-20.0)FSN3(P)E
RPC-(3.0-6.0)FSN3E
RPF(I)-(1.0-2.5)FSN2E
Description
6