Blade Holder Ce-Tc - Leica CM1860 Instructions For Use Manual

4. Screw the knurled nut
6
10
9
Fig. 41
Note
All 4 longitudinal edges of the anti-roll glass plate can be used.

7.4.5 Blade holder CE-TC

The blade holder CE-TC
carbide - TC65).
Handling of this holder is identical to that of the blade holder CE (→ P. 47 – 7.4.4 Blade holder CE).
Fig. 42
Leica CM1860/CM1860 UV
(→ Fig. 41-10) from below onto the shaft (→ Fig. 41-8).
11
8
7
(→ "Fig. 42") is designed only for disposable carbide metal blades (tungsten
Daily Use of the Instrument
Anti-roll plate (with glass stage plate)
Width: 70 mm (→ Fig. 41-11)
Available with various spacers:
• 70 mm - 50 μm, for section thickness: < 4 μm
• 70 mm - 100 μm, for section thickness: 5 μm - 50 μm
• 70 mm - 150 μm, for section thickness: > 50 μm
7
53