Control Panel (When Using Sp 320Sfn Or Sp 377Sfnwx) - Ricoh SP 320SFN User Manual

No. Name
14 Selection keys
15 Data In Indicator
16 [Back] key
17 Alert Indicator
18 [OK] Key
19 [Start] key

Control Panel (When Using SP 320SFN or SP 377SFNwX)

1 2 3 4 5 6
14 15 16 17 18 19
No. Name
1 [On Hook Dial] key
2 [Address Book] key
3 [Image Quality] key
4 [Shortcut to Func.] key
5 [Density] key
Press the key underneath an item shown on the bottom line of the
screen to select it.
This indicator flashes blue when the machine receives print data
from the host device.
Press to cancel the last operation or to return to the previous level
of the menu tree.
This indicator lights up red when the machine runs out of paper or
consumables, when the paper settings do not match the settings
specified by the driver, or when other errors occur. It flashes when
the toner is nearly empty.
Press to confirm settings and specified values, or to move to the
next menu level.
Press to start fax transmission/reception, scanning, or copying.
7 8 9
20 21 22 23
Press to use on-hook dialing to check the destination's status when
sending a fax.
Press to select a scan or fax destination from the Address Book.
Press to select the scan quality for the current job.
Press to use the function pre-assigned to this key.
Press to adjust the image density for the current job.
Guide to Components
Description
10 11
24 25
Description
12 13
DSG106
21