Ricoh SP 320SFN User Manual page 199

Low Humidity Mode
Item
Low Humidity If the machine is used in a room where
Mode humidity level is low, black lines of a
few millimeters thick may appear on
printouts with 75-millimeter spaces in
between. Selecting [On] for this setting
may prevent these lines from
appearing (wait for about one day
until this setting becomes effective).
Note that when this setting is enabled,
the machine automatically performs
self-maintenance in every 10 minutes.
Image Density
Item
Image Density Adjusts the density of images on prints.
Description
Description
Value
• Off
• On
Default: [Off]
Value
-3 to +3
Default: 0
System Settings
197