Table of Contents
Advertisement
5. Scanning Originals
3.
Press the [Start] key.
4.
Select the file format from [TIFF] or [PDF] by pressing the corresponding selection key.
If the [Limitless Scan] setting under [Scan Settings] is enabled, you may see the following screen on
the display when scanning from the exposure glass.
If you see this screen, proceed to the next step.
5.
If you have more originals to scan, place the next original on the exposure glass, and
then press [Yes]. Repeat this step until all originals are scanned.
6.
When all originals have been scanned, press [No] to start sending the scanned file.
7.
Wait until "Completed the Process" is displayed on the screen.
Scanned files are saved in the root directory of the USB flash memory device.
8.
Remove the USB flash memory device from the machine.
• To cancel scanning, press the [Scanner] key, and then press the [Clear/Stop] key. The scan files
are discarded.
122
DSG133
Advertisement
Table of Contents
Troubleshooting
