Ricoh SP 320SFN User Manual page 277

Message
Memory Overflow
Memory Overflow Memory has reached capacity
while scanning the second or
TX
later pages of the original when
Cancel
trying to send a fax in Memory
Transmission mode.
Misfeed: BypassTray Paper has been jammed in the
bypass tray.
Misfeed: Dup. Unit Paper has been jammed in the
duplex unit.
Remove Paper
Misfeed: Stnd. Tray Paper has been jammed in the
paper exit area.
Misfeed: Tray 1 Paper has been jammed in the
tray 1 paper input area.
Net Communication Connection with the server was
Error lost while sending or receiving
data.
Network is not Ready A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
On Hook or Stop key The machine has been off-hook
for an extended period of time.
Causes
• The machine's memory
reached capacity while
scanning the first page of
the original to store a fax
job in memory before
transmission.
• The machine's memory
reached capacity while
storing a fax in memory in
Memory Transmission
mode.
Error and Status Messages on the Screen
Solutions
Resend the fax in parts as several smaller
individual faxes, or send at a lower
resolution.
Press [TX] to send only the pages that have
been scanned in memory, or press
[Cancel] to cancel.
Remove the jammed paper. See
page 281 "Clearing Misfeeds".
Remove the jammed paper. See
page 281 "Clearing Misfeeds".
Remove the jammed paper. See
page 281 "Clearing Misfeeds".
Remove the jammed paper. See
page 281 "Clearing Misfeeds".
Contact the network administrator.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
Put down the handset phone or press the
[Clear/Stop] key.
275