Operations During Calls; Placing A Call On Hold; Adjusting The Receiver Volume - UTStarcom UTS-708J Instruction Manual

OPERATIONS DURING CALLS

Placing a call on hold

Place a call on hold when you want to temporarily stop the call. While the other
party is placed on hold, they cannot hear you. You can select the hold melody from
11 preset melodies (page 70).

Adjusting the receiver volume

You can adjust the volume of the caller's voice while talking. Volume has 4 levels. When receiver volume is "Maximum", volume
will not change when
MEMO
• At the time of purchase, the receiver volume is set to "Large".
• Even when the call terminates, the set volume does not change until when it is changed again.
1
Press
The set hold melody is played to the
caller. [hold icon] blinks.
2
Press
1
hold.
You will now go back to the call.
2
is pressed. When receiver volume is "Small", volume will not change when
1
Press
The current setting is displayed.
2
By pressing
volume level switches.
1
Small
•
2
during a call.
or to cancel the
or during a call.
or , the receiver
Medium Large
Holding...
is pressed.
Maximum
37