Using The Hands-Free/Speaker Function - UTStarcom UTS-708J Instruction Manual

Personal station (ps)
Table of Contents

Advertisement

MEMO
• When recording your original answering message (page 56) , there can be two recordings.
• Even when the phone is off and the battery is removed, the content of voice memo is saved.
Clearing all stored conversation memos
1
Press
.
The "Playback Menu" is displayed.
2
Press
.
Press
or
3
Press
.
All stored conversation memos will be deleted.

Using the hands-free/speaker function

When you use the hands-free function, you can talk on the phone without holding it.
When you use the speaker function, you can listen to the person you are talking to from a speaker.
Press and hold down [off-hook icon] for more than 2 seconds during a call to activate hands-free mode.
After that, you can switch back and forth between hands-free mode and speaker mode by pressing
To return to normal phone mode, press and hold down
seconds while in hands-free or speaker mode.
MEMO
• When you switch to hands-free/speaker function, the volume of the person you are
speaking to can suddenly increase. When setting, keep the receiver away from your ear.
• When using the hands-free/speaker function, the battery duration for continual
communication time will be shorter than stated in "Guide for battery duration" (page 20).
to point
to "Yes".
Hands-free
00:21
Speaker mode
00:21
Message Memory
Clear All
Yes
No
Set
Select
.
for more than 2
39

Advertisement

Table of Contents
loading

Table of Contents