Table of Contents
Advertisement
RECEIVING A CALL
1
1
2
3
4
Incoming call display types
You can use "Selecting the ring-tone volume and type" (page 67) to change the incoming call display.
• When beep ring-
tone is set
INCOMING
If you do not answer
If you do not answer the call, "INCOMING CALL" will be displayed in the right edge
of the bottom row. When the phone returns to standby condition,
displayed.
disappears when call memory (page 30) is checked.
Note that when you miss a call from a caller whose phone is set to notify the other
party, that caller's number is stored in the call memory (page 30). If that caller is
registered in your phone book, the callers name is also displayed.
Press any key to remove this display.
1
The incoming tone or vibration
activates and the incoming light blinks.
2
Pull the antenna.
3
Press
.
You will now be able to talk to caller.
lights up and the calling time will be displayed.
4
Press
to terminate your call.
disappears and the calling time will
be displayed for 3 seconds, then phone
will return to standby screen.
• When vibration
is set
INCOMING
INCOMING
• When melody ring-tone
is set
INCOMING
00:00
03:17
will be
35
Advertisement
Table of Contents
