Table of Contents
Advertisement
ADJUSTING THE SOUND
Selecting the ring-tone volume and type
To adjust the ring-tone volume and type, press and hold
for more than 1 second while in standby condition.
While call volume is set to "Loud" you cannot scroll by pressing
Also, when volume is set to "Step-down", you cannot scroll by pressing
.
Step-down
step up
MEMO
• Only one vibration selection set by "Selecting the incoming call notification method
F11" is displayed. The vibration selections are as follows.
"Vibration 1": Vibration only
"Vibration 2": Vibration - short sound
"Vibration 3": Vibration - ring-tone sound
• When in transceiver mode, you can only use "Vibration 1".
• You cannot use "Step-up" or "Step-down" while in transceiver mode.
Selecting the incoming call notification method (F11)
For each mode, you can select the incoming call notification method from 10
types of ring-tone, 11 melodies or 3 types of vibration notification. The volume and
type are selected from 6 options (including OFF).
Selecting the ring-tone or vibration
1
Press
2
Select which mode to set by using
You cannot set modes that are not assigned to a number.
3
Press
4
Press
The screen to select the ring-tone or vibration appears.
vibration (1 ~ 3)
Only one vibration selection is displayed (see MEMO).
.
or
to select "Tone" or "Vibration".
.
or
Ring-Tone
Loud
Med
.
Soft
OFF
Select/Set
OFF
Soft
~
.
Ring-Tone
OFF
Vibration 1
Step-up
Step-down
Select/Set
Med
Loud
F11
Set Ring-tone
Public
Transceiver
Set Ring-tone
Tone
Vibration
Set
Select
67
Advertisement
Table of Contents
