Basic Functions; Making A Call; Answering Calls; Speakerphone - UTStarcom CDM7026 Manual

BASIC FUNCTIONS

MAKING A CALL

1.
Enter a phone number.
To modify the phone number you have entered :
Note
• To erase one digit at a time press the Clear Key
• To erase the entire number, press and hold the Clear Key
2.
Press the SEND Key .
• If "CALL FAILED" appears on the display or the line is busy,
Note
press the SEND Key or the END Key
• If you activate the "AUTO RETRY" function, the phone will automatically
retry for the number of times you have selected.
• When you place or receive a call from stored phone numbers, only the
name will be displayed.
• If "Enter Lock Code" appears on the display enter your 4-digit password
to unlock your phone.
• Your default password is the last 4 digits of your phone number.
3.
To end a call, press the END Key

ANSWERING CALLS

1.
When your phone rings or vibrates, press the SEND Key
answer the incoming call. (Depending on your phone's settings,
you may also answer incoming calls by opening the phone or by
pressing any digit key. See page 60 for details.)
• To ignore incoming calls, press the Right Soft Key
2.
To end a call, press the END Key
20
.
.
.
.
to
[Ignore].
.
BASIC FUNCTIONS
• In Auto Answer Mode, a call is automatically answered after
Note
ringing for five seconds.

SPEAKERPHONE

The speakerphone feature lets you hear audio through the speaker and
talk without holding the phone.
1.
To activate the speakerphone while in answering or calling modes.
To activate speakerphone during a call,
[Options], then press .
2.
The phone returns to normal (Speakerphone Off) after ending a call
or when the phone is turned off and back on.

WAIT/PAUSE FEATURE

Pauses are used for automated systems (i.e., Voicemail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1.
To insert a wait/pause, enter a phone number then press the Right
Soft Key [Options]. Select either a P-Hard Pause ("P" appears)
or a T-2Sec Pause ("T" appears).
2.
Press the SEND Key to dial or press the Right Soft Key
"Save" to save the number.
press the Right Soft Key
then
21