Table of Contents
Advertisement
1
If your phone is turned on, turn it off by pressing
Always turn off the power.
2
Remove the battery compartment cover.
Slide the cover towards the base of the phone and remove by lifting.
3
Remove the battery pack.
When removing the connector, hold the cord in a position near the connector
and pull lightly.
4
Attach the new battery pack (page 22), prepare the battery charger
(this page) and charge (page 24).
Use the designated battery charger only.
Request for battery pack collection
When returning used lithium ion batteries, always insulate the
connector parts using tape. Otherwise, the bare connectors could
short circuit causing leakage, heat generation and ignition.
The battery pack is a lithium ion battery. For the sake of environment protection,
do not discard with other non-combustible rubbish. Please hand the old battery
over at the place you purchase the replacement battery.
Preparing the battery charger
1
Plug the battery charger's AC adapter plug
into the battery charger's insertion port.
Fix the cord in place by passing through the hook.
2
Plug the battery charger's AC adapter
into the AC outlet.
Warning
for more than 2 seconds.
AC adapter
plug
Hook
Insertion
port
23
Advertisement
Table of Contents
