Setting The Answening Message - UTStarcom UTS-708J Instruction Manual

USING THE ANSWER MESSAGE FUNCTION
Setting the answering message
You must record an original answering message before you set the message. See
page 56 for how to record it.
Setting by menu
1
Press
" * Recorded Items Remain" is displayed and
the "Playback Menu" is displayed.
2
Press
After the original answering message plays, the message mark lights up. While
the message is playing you can stop it by pressing
By doing this, answering message function has been set.
MEMO
• After 2 answering messages are saved and no more messages can be recorded, "
Message Memory is full" is displayed and the display returns to the "Playback menu."
• The message settings are kept even when the phone is turned off.
• Even if the battery is removed, the answering message and the contents of the
message settings are not deleted.
Setting by
You can set an answering message by just using
1
Press and hold down
" * Recorded Items Remain" is displayed and after the answering message
plays, the message mark lights up.
By doing this, the message function is set. To stop messages while they are
playing, press
58
.
.
for more than 2 seconds.
.
Playback Menu
2 recorded
Items Remain
Playback Menu
2 Recorded
Items Remain
Playing Back
Message
AnsweringMessage
Setting Finished
.
Message Playing Back
Setting Finished
Answering Message
(cont.)
Playback Menu
Answering Set
Voice Memo
Playback
Clear All
.
14:38
2/20(SUN)
PlaybackStop
14:38
2/20(SUN)
PlaybackStop