Selecting The Hold-Tone (F14); Setting And Canceling Manner Mode - UTStarcom UTS-708J Instruction Manual

Personal station (ps)
Table of Contents

Advertisement

Selecting the hold-tone (F14)

You can select one of the 11 preset melodies.
1
Press
The current settings are displayed.
2
Switch between options using
When you switch between options, the selected melody rings.
Melody 1 ~ 11
3
Press
.
The phone beeps to confirm the operation.
MEMO
• In transceiver mode, you cannot set a hold-tone.
• When you purchase the phone, Melody 1 is set.

Setting and canceling manner mode

If you press manner mode, the ring-tone is set to vibration, key touch tones etc.
are disabled and all sounds are disabled. This is a convenient function as it allows
you to quickly switch to manner mode when you do not want your phone to make
a noise because you are in an art museum etc.
1
When in the standby condition, press and hold
for more than 2 seconds.
Manner mode is set and
To cancel,
Perform the same operation as in Step 1 while in the standby condition.
Manner mode is cancelled and
MEMO
• The setting of "Selecting ring-tone type" is not changed by setting/canceling manner
mode.
• If you try selecting the ring-tone volume or type or selecting the ring-tone notification
method etc. when manner mode is set, "Manner Mode set" will be displayed and you
will not be able to make settings.
.
: Melody numbers are the table on page 70.
appears in the display.
disappears.
or
.
F14
Select Hold-tone
Melody
ToySoldierMrch
Walzer
Set
Select
69

Advertisement

Table of Contents
loading

Table of Contents