Table of Contents
Advertisement
FSU811 User Guide
After dialing the number, the call timer is activated, and the call duration is
displayed. The time displayed here is for reference only, and should not be
used as a basis for disputing charges
After the call, press SPEAKER key to hang up, or put the MIC back to the
phone.
2.2
One-Key Dial
1. Pick up the receiver (off-the-hook) or press the SPEAKER key; the off-the-
hook screen will be displayed.
2. Press and hold (more than 2 seconds) the number key that corresponds to the
desired number.
The corresponding number is displayed.
To use single key dialing, you must preset the keys. For details, please refer to
"Speed Dial".
3. After the call, hang up the receiver (hang-up) or press the SPEAKER key
again to return to the standby display.
Note:
You can also press and hold the number key that corresponds to the desired number; the
number is displayed, then press the TALK or MENU/OK key to dial.
2.3
Answer Incoming Calls
Irrespective of which menu is currently displayed, an incoming call will return the
phone to the incoming call display. After the call ends, the display will once again
return to the previous menu.
1. An incoming call will cause the phone to ring.
If you have subscribed to the Caller ID service (requires network support), the
caller's number will be displayed. If this number has been stored in the phone
book, the incoming caller's name will also be displayed.
Even if you have subscribed to the Caller ID, certain incoming call numbers
cannot be displayed. In these cases, the "CID can not display "message will be
displayed.
I n Com i ng Cal l
Answ er
2.
Pick up the receiver (or press the SPEAKER key) to answer incoming calls.
11/05 12： 23
Com pany
12345678
Rej ect
Basic Operations 2-3
Advertisement
Table of Contents
