Using Dial Memo - UTStarcom UTS-708J Instruction Manual

Using dial memo

Phone numbers (2 calls, maximum 22 digits) can be memorized during a call. You
can place calls by accessing these numbers from the memo.
3
1
2
Placing a call by accessing the dial memo
See "Using redial key to place calls" on page 32.
Deleting the dial memo
See "Deleting individual memorized numbers" on page 33.
MEMO
• When 2 numbers are already registered in the memo, the oldest memo is deleted
when the new memo is registered. If you want to keep the dial memo, you can
register it in phone book (page 44).
• When you wish to cancel the dial memo operation, press and hold
than 2 seconds.
1
Press during a call.
2
Input the number you want to memorize.
If you make errors, give
press, then each time you press
number on the right end will be erased.
You can re-input numbers from there.
3
Press .
The phone beeps to indicate the
process is completed and the
communicating display will return.
Dial Memo
Enter the Number
HoldDwntoRtr
Dial Memo
one quick
, the
123456789012
Set
Dial Memo
Recoding Fin.
123456789012
Clear
for more
31