Table of Contents
Advertisement
*SM-801 PHS/sec3(GB)
00.3.9 4:52 PM
3. Basic operations
DIALING FROM THE INCOMING CALLS LOG
Press q
3
• The displayed number is dialed.
• Press
r
to transfer and store the number in the phone
book (p. 86).
Deleting numbers from the incoming calls log
Display the number to delete s t
1
2
Presso (to delete one number)
Pressu (to delete all number)
Note:
• If a call comes in but is not answered
The display shown at right will be presented in the standby mode.
Press
to check the incoming calls log, or press
i
clear the screen. Check who called in the incoming calls log.
• The same number will not be stored twice in the incoming
calls log.
A number is stored only once in the log together with the date and time a call
was last received from that number.
• If a number is stored with multiple names.
Only one name will be displayed.
• If more than 10 numbers are dialed (including number memos).
The oldest number will be deleted.
• Maximum 32 digits per number
If a number is in the phone book, a name and up to 12-digit number will be
displayed. If a number is not in the phone book, numbers in the redial log can
have up to 24 digits. For longer numbers, press
digits; press it again to return to the previous display.
• Numbers can be transferred from the redial log to the phone book (p. 86).
If a name is changed in the phone book, the redial log is also changed to
reflect the new name.
Page 46
to
w,t
either way to display all
p
46
STORING A NUMBER WHILE TALKING
A quick memo of up to 32 digits containing a phone number and other numbers can
be stored while talking. The contents of this quick memo log are stored even if the
power is turned off. This quick memo log and the redial log together can contain up to
ten entries (p. 43).
Reminder: The date and time must first be set (see p. 35) to use this feature.
Take a memo
While talking o
1
• To stop, press
.
o
2
Enter a number.
• The following keys will be stored:
0
to
9
,
-
,
=
,
r
(P).
To delete one digit: press
t.
To delete all digits: press and hold
t
Press o
3
• In Use is displayed again.
To view a memo
s
sdisplay the desired memo.
Press
y
[
• If an entry contains more than 12 digits,
press
to display all places.
u
NOTES
r
•
cannot be pressed to enter a pause (P) as the first digit in a number.
• If 25 or more digits are entered
The entered sequence will be displayed as shown here.
• If more than 10 numbers are logged (including the redial log)
The oldest number will be deleted.
• While "Number Memo" is displayed
A call cannot be placed on hold by
The memo will be stored when
w
47
3. Basic operations
(NUMBER MEMO)
.
t
.
is pressed to return to the standby mode.
Advertisement
Table of Contents
