Table of Contents
Advertisement
Figure 2-6 : Coaxial Cable Connection to Antenna
2.3
OPERATION
Desktop Phone will start its function when you insert the DC plug into DC IN jack.
It will communicate with PHS base station automatically, and operation will be
available after few seconds.
Placing a Call
!
Pick up handset.
Dial tone will be heard from the handset receiver.
Dial a telephone number of your party.
Ring-back tone will be heard from handset receiver.
When your party answer your call, conversation will be available.
Hang up the handset when you finish the conversation.
You can call the party you last called by depressing "REDIAL" key for less than
1 second after hearing dial tone.
9. Connect the coaxial cable to the antenna as shown in
Figure 2-6.
10. Wrap the cable connection first with the
self-adhesive rubber tape. Stretch the tape until it is
½ its original width. Then wrap the PVC tape around
the rubber tape.
Coaxial Cable
21
Advertisement
Table of Contents
