Call Hold; Call Waiting (Requires Network Support) - UTStarcom FSU811 User Manual

2-4 Basic Operations
The call duration is displayed. The time displayed here is for reference only,
and cannot be used as a basis for disputing charges.
2003- 11- 05
Tal ki ng. . .
CO M PANY
12345678
3. After the call, hang up the receiver (hang-up) or press the SPEAKER key
again to return to the menu displayed prior to the call.
2.4

Call Hold

During the call, press the HOLD key to place the call on hold. Press the HOLD
key again to resume the call.
The call holding will also be charged.
2003- 11- 05
Hol di ng. . .
CO M PANY
12345678
2.5

Call Waiting (Requires Network Support)

Call Waiting requires Service Provider activation.
While on a call, if a third party calls, you can answer the incoming call without
hanging up on the other party .
For example, when A is on a call with B, C calls A.
1. When A is on a call with B, if C happens to call A, then A will hear the Call
Waiting tone.
2. Now, A can press the cradle button to connect with C (B is placed on hold)
without hanging up on B. Press the cradle button again to resume the
conversation with B (C is placed on hold). Every time you press the cradle
button, the call will switch.
The following operations are also available to "A":
Press the MENU/OK key or the FLASH key, then press the [0] key to refuse
the incoming third party call.
Press the MENU/Ok key or the FLASH key, then press the [1] key to end the
call with B and answer the incoming third party call.
Press the MENU/OK key or the FLASH key, then press the [2] key to place B
on hold and answer the incoming third party call.
12: 23: 03
01: 11
12: 23: 03
01: 11
FSU811 User Guide