Vaisala PWD22 User Manual page 75

Chapter 5__________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 73
The system response to the CONF command is presented below:
CONF. PASSWORD (4 CHARS MAX)
UPDATE CONFIGURATION PARAMETERS
UNIT ID (2 CHAR)() 1
UPDATED
SET REFERENCE PARAMETERS
OFFSET ( 156.47) Y
OFFSET REFERENCE UPDATED
MODE UPDATED
ALARM LIMIT 1 (
ALARM LIMIT 1 UPDATED
ALARM LIMIT 2 (
ALARM LIMIT 2 UPDATED
ALARM LIMIT 3 (
ALARM LIMIT 3(UPDATED)
RELAY CONTROL MODE
0 = 3*VIS, 1 = 2*VIS & HW ( 0) 1
RELAY ON DELAY (
RELAY OFF DELAY (
TRANSMITTER CONTAMINATION LIMITS
WARNING LIMIT ( 0.5)
ALARM LIMIT ( 3.0)
RECEIVER CONTAMINATION LIMITS
WARNING LIMIT (
ALARM LIMIT ( 600)
ANALOG OUTPUT MODE
0=LINEAR, 1=LN, 2=EXTI, 3=VG1, 4=VG2 ( 4)
ANALOG OUTPUT RANGE
MAX VISIBILITY ( 2000)
= mA ( 20.0)
MIN VISIBILITY (
= mA ( 4.0)
HOOD HEATERS USED 1=YES, 0=NO (
END OF CONFIGURATION
The meaning of the questions asked by the system is described below.
Bold text is used to indicate user actions. The old settings are not
changed, if the user just presses ENTER as the answer.
First the system asks for a new password:
CONF. PASSWORD (4 CHARACTERS MAX)
This question is asked, when there is no valid password. If updating is
requested by the N parameter and an empty line is given as an answer,
the password is removed. Otherwise, the user gives a new password to
the system.
0) 1500
0) 1000
0) 500
5)
5)
300)
10)
0)