Weather Related Commands - Vaisala PWD22 User Manual

Chapter 5__________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 67
where
Message_interval =
For example, the following command selects message number 0 to be
sent once in a minute:
AMES 0 60
The following command selects message number 0 and cancels the
automatic sending:
AMES 0 0
The AMES command without parameters displays the current
selection.

Weather Related Commands

The following commands are used to display/set the weather analysis
parameters and results.
- WPAR Weather parameter message
- WSET PRW reference values
- CLRS Clear precipitation sums
Given in multiples of 15 s (= measuring
interval). Therefore, intervals 15, 30, 45... are
valid. Other intervals are converted to integer
multiples of 15 s. The maximum sending
interval is 255 s (4 min. 15 s). Negative or
zero interval ignores the automatic sending.
This is used when messages are polled. For
details, refer to section Automatic Message
Sending on page 62.