Subscribe to Our Youtube Channel
Related Manuals for Vaisala PTB220Case
Summary of Contents for Vaisala PTB220Case
- Page 1 All manuals and user guides at all-guides.com PTB220TS / CASE UIDE U370EN-1.1 1999...
- Page 2 All manuals and user guides at all-guides.com PUBLISHED BY PUBLISHED BY © Vaisala 1999 No part of this manual may be reproduced in any form or by any means, electronic or mechanical (including photocopying), nor may its contents be communicated to a third party without prior written permission of the copyright holder.
-
Page 3: Table Of Contents
All manuals and user guides at all-guides.com Table of contents PRODUCT DESCRIPTION................1 OPERATION ....................2 Operating voltage ..............2 Tilting frame ................3 Battery ..................3 RS232 ..................3 RS485 ..................4 LED Indicators................. 4 ASSEMBLING THE CASE AND AN EXISTING BAROMETER ......5 TECHNICAL DATA................... -
Page 4: Product Description
Transfer/travelling standard. It is also possible to assemble the customer's existing PTB220 barometer and separately ordered wooden case (PTB220CASE); see the instructions on page 5. Please note, that there are certain requirements for the PTB220 barometer to be compatible with the case. The barometer should have the following features: −... -
Page 5: Operation
All manuals and user guides at all-guides.com ___________________________________________________________________________ UIDE OPERATION Remove the PTB220TS from the package and connect a wall adapter to recharge the battery. Switch the power on. The barometer is now ready for use. For detailed operation instructions and descriptions refer to the User's Guide of the PTB220 series digital barometers. -
Page 6: Tilting Frame
All manuals and user guides at all-guides.com _____________________________________________________________________________ PERATION Tilting frame The barometer is mounted in a separate wooden case, tilting frame. It can be set to three different positions: horizontal, ~20° and ~40°. For a tabletop use, the tilting frame can be removed from the case by lifting upwards. -
Page 7: Rs485
All manuals and user guides at all-guides.com ___________________________________________________________________________ UIDE SIGNAL not used not used ground for RS 232 not used not used not used not used RS485 The pin assignment of the RS485 serial interface connector of the PTB220TS/CASE is as following: SIGNAL not used RS485 HI... -
Page 8: Assembling The Case And An Existing Barometer
All manuals and user guides at all-guides.com ASSEMBL AND AN _________________________________________ ING THE CASE EXISTING BAROMETER ASSEMBLING THE CASE AND AN EXISTING BAROMETER To assemble the existing PTB220 digital barometer and the wooden case follow the instructions below. NOTE! It is recommended to remove the cover hinge of the barometer by loosening its screws. - Page 9 All manuals and user guides at all-guides.com _________________________________________________________________________ ECHNICAL DATA 8. Insert the battery into its covering. Place the conducting wire end to left-hand side. 9. Attach the spacers (2 pcs M3x12). Fix the support bar of the pressure port to the spacers.
-
Page 10: Technical Data
All manuals and user guides at all-guides.com ASSEMBL AND AN _________________________________________ ING THE CASE EXISTING BAROMETER TECHNICAL DATA Electronics Supply voltage 10...25 VDC Current consumption 50 mA in battery operation (display backlight on) 300mA / 10V, 130mA / 25V (recharging, battery empty) 100mA / 10V, 40mA / 25V (battery full) Communication interfaces...
Need help?
Do you have a question about the PTB220Case and is the answer not in the manual?
Questions and answers