Bus Communication - Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual

3.4

BUS Communication

SITRANS F M Transmag 2 is available with HART or PROFIBUS communication.
● The HART protocol is superimposed on the analog output (current output). This
● In the PROFIBUS PA version, the analog output and the digital output 2 are replaced by
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
– Simulation of output signal via analog output, digital output 1 and digital output 2
– Option: digital output 2 as digital input for resetting counter values or for interruption in
measurement (PZR)
communication capability permits parameterization of the device using the HART
communicator or a PC/laptop and SIMATIC PDM software in addition to local operation.
the digital PROFIBUS PA output. Parameterization of the device is then possible using
PROFIBUS communication and SIMATIC PDM in addition to local operation.
Description
3.4 BUS Communication
11