Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual page 18

Installing
4.2 Sensor installation
Avoid installation at the highest point of the pipe because of accumulation of gas
Figure 4-4
Install the flowmeter so that the measuring pipe cannot run empty and is always filled with
medium.
The sensor must be installed in a culvert in the case of an unfilled pipe or only a free level
line (outlet).
Figure 4-5
16
Installation at the highest point
Installation in a constantly filled pipe
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07