Connection Of Bus Communication Add-On Modules; Reassembling The Device - Siemens SITRANS F MAG 6000 I Operating Instructions Manual

Frequency/pulse output in passive mode
5.5

Connection of bus communication add-on modules

When the add-on module has been installed, the electrical connections are available on
terminal rows 91-97.
For more information
Refer to the relevant BUS communication Quick Start or Operating Instructions available at
the SITRANS F literature CD or on the internet, at: www.siemens.com/flowdocumentation
(www.siemens.com/flowdocumentation)
5.6

Reassembling the device

Ensure that the two screws (20 TORX) are tightened properly for correct assembly and
proper ground connection.
MAG 6000 I / MAG 6000 I Ex de transmitter
Operating Instructions, 04/2016, A5E02083319-AG
5.5 Connection of bus communication add-on modules
Connecting
37