Connection Of Bus Communication Add-On Modules; Reassembling The Device - Siemens SITRANS MAG 6000 I Operating Instructions Manual

Connecting

5.6 Reassembling the device

Frequency/pulse output in passive mode
Frequency/pulse output passive
5.5

Connection of bus communication add-on modules

When the add-on module has been installed, the electrical connections are available on
terminal rows 91-97.
For more information
Refer to the relevant BUS communication Quick Start or Operating Instructions available at
the SITRANS F literature CD or on the internet, at: www.siemens.com/flowdocumentation
(www.siemens.com/flowdocumentation)
5.6 Reassembling the device
Ensure that the two screws (20 TORX) are tightened properly for correct assembly and proper
ground connection.
38
Ex
24V
56
57
RL
Non Ex
Barrier
Operating Instructions, 08/2018, A5E02083319-AH
SITRANS MAG 6000 I/6000 I Ex de