Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual page 34

Commissioning
6.1 Operating Transmag 2
Operation via local display
The device is operated with the optical elements on the local display.
The elements are actuated by touching the glass panel above the appropriate operating
element. The text display above the operating elements gives a menu-guided operation of
the individual device functions/parameters.
①
②
③
Figure 6-1
Note
Operation does not require opening of the device. This means that the high degree of
protection of IP67 is guaranteed at all times.
Navigating the menu structure
The available device functions and parameters are shown in the second line of the display.
You can select them there with the
selected device function or setting level of the parameters (Enter function) with
possible to exit the selected function or setting level to the level above with
The currently valid setting appears after selecting the setting level of a parameter. The
programmable value flashes in the second line of the display when programming is enabled.
You can change the parameter setting in this position. You have to decide between the
following types of input to enter data:
● Direct numeric input
● Input from given table
32
LCD
Optical (infared) keypad
Infrared transmitter
Local display of the SITRANS F M Transmag 2
and operating elements. You can scroll in the
Operating Instructions, 11/2009, A5E00102775-07
. It is
.
SITRANS F M TRANSMAG 2