Parameters - Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual

Parameters

The device functions and parameters are listed below with the factory setting and setting
option. The menu code only appears in the local display.
Display
Table A- 1 Function group display parameters
Menu code Device function,
Parameters
1.1 Display Param.
Language
1.1.2 Line 1
1.1.3 Line 2
1.1.4 Display flow
1.1.5 LCD lighting
1.2 Multi-Display
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
Description
Setting parameter for the local display
Language for user guidance
Definition of measured values to be
displayed for line 1 in multi-display
Definition of measured values to be
displayed for line 2 in multi-display
Selection for type of presentation of the
flow rate (% and bargraph only apply to
line 2)
When the "Flow" parameter has been
selected for lines 1 and 2, "Bargraph in %"
is always shown in line 2.
Lighting of the display
On: permanently switched on
Off: automatic switch on by pressing key,
switch off after 10 min
Simultaneous display of two measuring
variables
Factory setting Setting options
Englisch
Deutsch
•
Deutsch
•
Français
•
Italiano
•
Español
•
Nederlands
•
Flow
Flow
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
•
Frequency
•
Flow
Totalizer net
•
Totalizer net
•
Flow velocity
•
Analog Val. 1, 2,
•
Frequency
Engineering Unit
Engineering Unit •
%
•
Bargraph in %
•
On
.Off
•
Off
•
Menu 1.1.2
(actual
•
measured value
Menu 1.1.3
•
line 1)
(actual
measured value
line 2)
A
79