Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual page 77

Installation conditions
Inlet pipe section
Outlet pipe section
Medium
Conductivity
Magnetic current frequency
Related operating conditions
Table 10- 5
Ambient temperatures
Remote design
Compact design
Display unit
Storage
Degree of protection
Electromagnetic compatibility (EMC)
Emitted interference
Noise immunity
Medium conditions
Medium temperature in compact
devices
Minimum conductivity of the medium
Design
Table 10- 6
Weight of transmitter
Compact versions
Remote version
Maximum line length
Housing
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
Related operating conditions
Design
≧ 10 x DN
≧ 5 x DN; installed centered to pipe
water without gaseous and solid parts
> 200 μS/cm
bipolar with prepulse
-20 °C to +60 °C (-4 °F to +140 °F)
-20 °C to +60 °C (-4 °F to +140 °F),
process temperature up to +60 °C (up to +140 °F)
0 °C to +50 °C (32 °F to 122 °F)
-25 °C to +80 °C (-13 °F to +176 °F)
IP67, NEMA 4X, 5
According to EN 61236 for use in industrial areas
According to EN 61326 for use in industrial areas
•
According to NAMUR NE21 for use in residential areas
•
-20 °C to +130 °C (-4 °F to 266 °F), Depending on sensor
and ambient temperature
≧1 μS/cm, on request 0,1 μS/cm, depending on medium
4.4 kg (9.7 lb)
Transmitter fixed onto measuring tube
Transmitter must be connected to the sensor using
shielded cables
100 m; (328 ft)
Die-cast aluminum, painted
Technical data
75