Introduction; Preface; Items Supplied; History - Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual

Introduction

1.1

Preface

These instructions contain all the information you need for using the device.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it as well as service and
maintenance engineers.
Note
It is the responsibility of the customer that the instructions and directions provided in the
manual are read, understood and followed by the relevant personnel before installing the
device.
1.2

Items supplied

● SITRANS F M Transmag 2
● Wall mounting kit (remote only)
● Cable glands (remote only)
● Ferrite cores
1.3

History

The contents of these instructions are regularly reviewed and corrections are included in
subsequent editions. We welcome all suggestions for improvement.
The following table shows the most important changes in the documentation compared to
each previous edition.
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
1
5