Siemens SITRANS F M TRANSMAG 2 Operating Instructions Manual page 17

Inlet/outlet section
The inlet and outlet lines must be kept straight
Figure 4-2
Sensor location
Do not install the sensor in pipe sections with a free pipe outlet which could run empty. When
installing in a downpipe, make sure that the pipe is always filled 100% with the medium
Figure 4-3
SITRANS F M TRANSMAG 2
Operating Instructions, 11/2009, A5E00102775-07
Installation between pipe elbows, valves and pumps
Installation in pipes without emptying
Installing
4.2 Sensor installation
15