Operation; Bowl And Tools; Operating Positions - Bosch MUM XL...GB Instruction Manual

en

Operation

Operation
W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Warning!
Do not operate the appliance without an
accessory / tool in the operating position.
Do not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwave-safe.
■ Before operating the appliance and
accessories for the first time, clean
t horoughly; see "Cleaning and servicing".
Preparation
■ Place the base unit on a smooth, clean
surface.
■ Prepare cable (Fig. C).
a) Appliances with cord store:
Pull out cable to the required length.
b) Appliances with automatic cord
winder:
Pull out the cord in one go to the
required length (max. 100 cm) and
slowly release; the cord is locked.
Reducing the cord length:
Pull gently on the cord and allow it to
roll up to the required length. Then
gently pull the cord again and slowly
release; the cable is locked.
Warning!
Do not twist the cord when inserting it. If the
appliance features an automatic cord winder,
do not insert the cord manually. If the cord
jams, pull out the cord all the way and then
allow it to wind up.

Bowl and tools

W Risk of injury from rotating tools
While the appliance is operating, never place
fingers in the mixing bowl. Attach the cover
(12) before operating the appliance! Keep
hands clear of rotating parts. Do not change
tools until the drive has come to a standstill –
when the appliance is switched off, the drive
continues running briefly and stops in the
tool change position. Do not move multifunc-
tion arm until the tool is at a standstill.
8
For safety reasons the appliance cannot be
operated in position 2-4 until the bowl has
been inserted and turned all the way or the
tool drive cover (7) has been attached.
Warning!
Use bowl with this appliance only. Insert
tools firmly into the drive until they lock into
position.
"Absolute" stirrer (14)
for stirring dough, e.g. sponge mixture
or mousse, and for folding in beaten
egg whites or cream.
Solid metal whisk (15)
for whisking egg whites, cream and
light dough, e.g. sponge mixture.
Kneading hook „High performance"
with dough deflector (16)
for kneading heavy dough and for
folding in ingredients which are not to be cut
(e.g. raisins, chocolate chips).
Important information concerning
the use of the whisk
Figure D:
The whisk should just touch the bottom of
the bowl in order to mix the ingredients thor-
oughly. The whisk can be positioned higher
for large quantities.
Adjust the height of the whisk as follows:
■ Remove mains plug.
■ Press the Release button and
move multi-function arm to
p osition 1.
■ Insert the whisk into the drive until the
whisk locks into position.
■ Hold whisk in place and loosen nut clock-
wise using enclosed key (on the base of
the appliance).
■ Set the whisk to the optimum height by
rotating the whisk:
– Turn clockwise: Raise
– Turn anti-clockwise: Lower
■ Press the Release button and
move the multi-function arm to
position 2.
■ Check the height of the whisk and, if
required, correct.