en
For your safety
in a safe way and if they understand the hazards involved. Children
shall not play with the appliance.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
Connect and operate the appliance only in accordance with the
specifications on the rating plate. Only use indoors. Do not use the
appliance if the power cord and / or appliance are damaged.
Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
Do not place the power cord over sharp edges or hot surfaces.
To prevent injury, a damaged power cord must be replaced by the
manufacturer or his customer service or a similarly qualified person.
Only our customer service may repair the appliance.
Safety instructions for this appliance
A Risk of injury
A Electric shock risk
Do not insert mains plug until all preparations for working with the
appliance are complete.
Never immerse the base unit in liquid or hold under running water. Do
not use a steam cleaner.
Do not adjust swivel multi-function arm while the appliance is
switched on. Wait until the drive has come to a standstill. Do not
change tool / accessory until the drive is at a standstill – when the
appliance is switched off, the drive continues running briefly.
Use only the rotary switch to switch the appliance on or off.
When the appliance is not in use, pull out the mains plug.
Before eliminating a fault, pull out the mains plug.
A Risk of injury from the rotating tools!
While the appliance is operating, never place fingers in the mixing
bowl. Attach the cover before operating the appliance! Keep hands
clear of rotating parts. Do not change tools until the drive has come to
a standstill – when the appliance is switched off, the drive continues
running briefly and stops in the tool change position / „Easy fill"-
position. Do not move multi-function arm until the tool is at a standstill.
Do not switch on the appliance until the blender has been screwed in
all the way and the tool drive cover has been attached. Cover unused
drives with drive covers.
A Risk of injury from sharp blades!
Do not touch blender blades with bare hands. Clean them with a
brush.
4