Table of Contents
Advertisement
Configuration: Encoder > Audio
Note In Edit mode, the settings that are affected through template settings (set in the
Configuration: Encoder > Template) are set apart on the bottom portion of the
screen.
MPEG4 Encoder Audio
Audio Input
Audio Balance
Audio Input Level
Audio Gain
30
Input can be from an Audio Jack (1/8" mini-phono jack) or from
Microphone DIN (AudioMate microphone). Note that audio
attenuation is relevant only if the 1/8" mini-phono jacks are used.
Note that model 9174-4200 (VBSSM) does not support audio.
-127 to 127. Default = 0. This setting controls the balance the output
level between the left and right audio channels, a value of -127 mutes
the right channel and a value of 127 mutes the left. A value of 0
distributes audio levels equally between the left and right channels.
Normal or Alternate. Default = Normal. Sets the audio level for the
encoder audio jack input. When set to normal, the audio inputs accept
a 4-volt peak-to-peak maximum signal. When set to alternate, the
audio inputs accept an 8-volt peak-to-peak maximum signal.
This setting controls the audio level of the encoder. When the Audio
Input Level is set to Normal, the settings are from 7 to –53 dB and
mute. The default is 0 dB. A setting of 7 is full volume and –53
effectively mutes the encoder. When the Audio Input Level is set to
Alternate, the settings are from 12 to –48 dB and Mute. The default is
0 dB. A setting of 12 is full volume and –48 effectively mutes the
encoder.
© 2009 VBrick Systems, Inc.
Hide quick links:
Advertisement
Table of Contents
