Mpeg-4 Admin Guide; Organization; Getting Help - VBrick 6000 series Admin Manual

This VBrick MPEG-4 Appliance Admin Guide is written for anyone who will be using or
configuring a VB6000 Series MPEG-4 appliance. This includes system administrators,
network technicians, and anyone who will be using or configuring a VBrick network video
appliance. VBrick encoder and decoder appliances are available in industry standard formats.
MPEG-4 appliances are used for delivering low delay television quality video over low and
medium bandwidth networks. These products are available in one and two channel
configurations, as well as a combination encoder/decoder that delivers two-way interactive
video.

Organization

Introduction
MPEG-4 Configuration
System Status
Diagnostics
Maintenance
Maintenance Mode

Getting Help

If you need help, or more information about any topic, use the online help system. The
online help is cross-referenced and searchable and can usually find the information in a few
seconds. Use the tree controls in the left pane to open documents and the up and down
arrows to page through them. Use the
one or more words in the box and press Enter. The search results will return pages that have
all of the words you entered—highlighted in yellow (Internet Explorer only). The
is not case-sensitive and does not recognize articles (a, an, the), operators (+ and – ), or
quotation marks. You can narrow the search by adding words.
If you can't find the information you need from the online help, or from your certified
VBrick reseller, you can contact VBrick Support Services on the web. Support Services can
usually answer your technical questions in 24 business hours or less. Also note that our
publications team is committed to accurate and reliable documentation and we appreciate
your feedback. If you find errors or omissions in any of our documents, please send e-mail to
documentation@vbrick.com and let us know. For more information about any VBrick
VBrick MPEG-4 Appliance Admin Guide

MPEG-4 Admin Guide

Explains the basics. Provides general configuration
recommendations as well as how to cable the appliance and
connect it to the network.
Explains how to configure MPEG-4 video appliances using the
IWS web interface.
Explains all of the detailed status information available about
the network, the encoder, the decoder, the hard drive, etc.
Explains how to run a variety of onboard diagnostics including
ping, traceroute, and decoder color bars.
Explains how to use various maintenance functions. These
reading and saving all configuration parameters and changing
user names and passwords.
Explains maintenance mode and how it is used to recover if
errors occur during of after a firmware download
box to find specific information. Simply enter
Search
box
Search
vii