Configuration: Decoder > Picture-In-Picture - VBrick 6000 series Admin Manual

Connection Mode
Configuration: Decoder > Picture-In-Picture
Picture in Picture
PIP Location
PIP Horizontal
Size
PIP Vertical Size
VBrick MPEG-4 Appliance Admin Guide
Loopback from Encoder - In this example the decoder will display
video from the local encoder (option only valid if encoder is present,
i.e. VB6200 encoder/decoder model).
On/Off. This will enable or disable the Picture-In-Picture display.
Picture-In-Picture can be any of the following 5 locations - top left,
top right, bottom left, bottom right and center.
The Picture-In-Picture horizontal size can be changed to any of the
following 4 sizes – full, half, quarter, thumbnail.
The Picture-In-Picture vertical size can be changed to any of the
following 4 sizes – full, half, quarter, thumbnail.
MPEG-4 Configuration
21