Billboard Ftp; Billboard Urls - VBrick 6000 series Admin Manual

MPEG-4 Configuration
By turning the billboard on/off, the saved URL is invoked and the browser will attempt to
display the resulting page. The URL can be configured to be a local file with the prefix 'file:/
/' or point to remote server with the prefix http://. The default billboard is assumed to be a
file located within the VBrick file system, file://./BB01/VB_1.HTM. If the billboard URL
points to a file within the VBrick, the filename has to follow the DOS 8.3 filename
convention (i.e. limited file name length). The valid extensions supported by the billboard are
.HTM, .JPG, .GIF, and .BMP. It is common for the billboard pages to have an .HTM
extension. Remote URLs are restricted to 255 characters.

Billboard FTP

It is possible to use FTP (File Transfer Protocol) to modify the contents of one of the pre-
configured Bulletin Board files resident on the VBrick. Use the browser to FTP files, or any
of the many FTP applications. Enter in the browser window:
(where x is the IP address of the VBrick appliance).
FTP://xxx.xxx.xxx.xxx
Use the Username and Password (default is case sensitive admin, admin) to login to the
VBrick. BB01 through BB16 are directories established to receive Billboard content. It is
possible to cut and paste new contents to a Billboard location from a file located anyplace on
the network or on the computer. To view the contents on the VBrick, change the URL in the
Billboard Section of the Integrated Web Server. In this example, the URL for the new file in
IWS Configuration: Billboard would read:
file://./BB03/atm.gif.

Billboard URLs

A URL for the billboard is much like a URL on the Internet. URLs can be local or remote,
and typically point to the source of the billboard to be displayed.
Local URL
A local URL points to a file within the VBrick, which can be downloaded to the VBrick using
a FTP utility program. All local URLs begin with: file://. There are sixteen pre-configured
directories to place custom billboards inside the VBrick. The billboard directories are named
BB01 to BB16.
Example 1
A single page billboard is placed in BB01. It requires one image file. The billboard page is
named VB_1.HTM. The URL, which is not case sensitive, to enter in the Billboard URL box
is:
file://./BB01/VB_1.HTM
Example 2
A multi-page billboard is placed in BB01. It requires four image files, one for each page. The
billboard pages are named VB_1.HTM, VB_2.HTM, VB_3.HTM, and VB_4.HTM. Each file
is connected to the next page within the html file using the legal syntax. The URL to enter in
the Billboard URL box is:
file://./BB01/VB_1.HTM
Remote URL
Example 1
A single page billboard on a remote server with IP Address 172.16.2.79. The name of the
billboard file is VB_1.HTM. The resulting URL is therefore:
http://172.16.2.79/VB_1.HTM
VBrick MPEG-4 Appliance Admin Guide 11