Table of Contents
Advertisement
RTP Packets Received
Out of Order
RTP Packets Played Out
of Order
RTP Packets Dropped
Access Units Dropped
Jitter Queue Underflow
Jitter Queue Overflow
RTCP Packets Received
RTCP Packets Sent
Status: Encoder Status
This menu allows users to view vital Encoder statistics. As you
Transmit State – Transmitting
does not happen check your VBrick's encoder configuration or network.
70
The number of RTP packets received that were out of order.
The VBrick decoder also uses the Jitter Queue to correct
packets that are received out of order. If the packet statistics
indicate a significant number of
you may be able to improve video and audio quality by
Order
increasing the setting in Configuration: Decoder > RTP > Time
in Jitter Queue. If you see
even with a large
Time in Jitter Queue
losing packets.
The number of RTP packets dropped.
The number of access units dropped by the RTP receiver. AU
packets may be automatically adjusted to account for
differences in timing between the encoder and decoder.
The VBrick decoder has an adjustable
protect against depletion by network jitter (see Configuration:
Decoder > RTP on page 22). If the packet statistics indicate a
significant number of
Jitter Queue Underflow
increase the setting in Configuration: Decoder > RTP > Time
in Jitter Queue to allow the decoder to handle more network
jitter.
An overflow occurs when there is an overflow in the buffer
capacity of the VBrick.
The number of RTCP packets received.
The number of RTCP packets sent.
and the
IP Bytes Transferred
RTP Packets Played Out of
RTP Packets Played Out of Order
setting, the network is
Time in Jitter Queue
counts you should
you should see
Refresh
count should increment. If this
© 2009 VBrick Systems, Inc.
,
to
Hide quick links:
Advertisement
Table of Contents
