VBrick 6000 series Admin Manual page 46

Category
Session
Information
Information URL
Contact Email
Contact Phone
Contact Name
Announce Program Guide (SAP) for Destination 1 & 2
Transmit
Retransmit Time
Time to Live
Type of Service
36
An encoder can have a SAP Category string. This string consists of
one or more keywords separated by spaces. Each category keyword
represents a tag associated with the Encoder's video stream. Decoders
can be configured to display in their Program and Conferencing
guides only video streams tagged by specific category keywords or
those containing no keyword. The string(s), used by the Decoder, is
set on the Decoder/Network screen. Characters are printable text and
are case sensitive. The total of all keywords in the string is 36
characters including spaces.
You can also use this field to filter the live streams shown in the ETV
Portal Server by source and client IP address by using the following
string:
IPMask=xxx.xxx.xxx.xxx
bit mask. (This string is simply another keyword you can use in
addition to those described above.) The Portal Server will parse the
bitmask and send the live stream only to clients with a masked IP
address that matches the masked IP address of the source VBrick. For
example, a stream with a category
with an address of
172.22.6.67
address but not to a client with an IP Address
172.22.3.4
There is no admin interface to this feature on the Portal Server; you
can use this filtering in addition to the standard authorization features
provided by the Portal Server.
A string identifying VBrick SAP Session Information that appears on
Program Guide. Default is "VBrick Streaming Video".
Informational text.
Informational text.
Informational text.
Informational text.
Enables or disables SAP transmission. Default = enabled.
Seconds. 1 – 9999. Default = 10. If SAP Timing is fixed, this is the
time in seconds between SAP transmissions. If SAP Timing is
variable, the actual retransmit time, as per RFC 2974, is reported.
Please refer to Configuration: System > General.
The number of hops (between routers) for which an IP packet is valid
on the network.
The TOS (Type of Service) can be configured in the IP header to
establish SAP packet priority in the network.
where
xxx.xxx.xxx.xxx
from a VBrick
IPMask=255.255.0.0
will be available to a client with an IP
© 2009 VBrick Systems, Inc.
represents a
.
172.16.3.4