Configuration: Jpeg - VBrick 6000 series Admin Manual

Configuration: JPEG

This windows lets you configure a WM encoder with an attached video source (such as a
camera) in order to take JPEG snapshots at a specified interval. Depending on the
application, the snapshot can be displayed in a web page in realtime or FTPed to a server for
archive storage. Type the following URL in a browser to display the captured image in a web
page. The following URL example contains the folder location of the JPEG file for each
encoder (if there are dual encoders).
Click to refresh image.
F5
http://172.22.123.23/vbs1SnapShot.jpg
JPEG Configuration
The following fields enable image capture and specify the capture interval and compression
quality. Note that if you change any of these parameters for a live encoder stream, there will
be a momentary (10 seconds or less) loss of video. (For JPEG capture status, see Status:
JPEG Status on page 72.)
40
or indicates the slot number of the encoder.
vbs1 vbs2
© 2009 VBrick Systems, Inc.