Lynx Rave 600 ACE 2017 Operator's Manual page 76

CONTROLS/INSTRUMENTS/EQUIPMENT
fmo2014-002-008_a
SLIDE TOWARDS FRONT
Upper Body Module Installation
1. Insert the upper body module tabs
into the upper bottom pan open-
ings.
fmo2014-002-004_a
1. Upper body module tab
2. Upper bottom pan opening
2. Slide the module towards rear.
______________
74
fmo2014-002-008_b
TYPICAL - SLIDE TOWARDS REAR
3. On both sides, install the upper body
module retaining screws.
fmo2014-002-005_a
RH SIDE SHOWN
1. Retaining screws
4. Connect:
– APS hose on the ECM (E-tec
Models)
– Headlights connector
– Gauge connector
– Air temperature sensor (ATS)
(E-tec Models)
– Air intake connector tube.
5. Install:
– Gauge
– Drive belt guard.