Lynx Rave 600 ACE 2017 Operator's Manual page 53

E-tec Models
PILOT
LAMP(S) BEEPER
ON
beeps every
5 minutes
Long beeps
repeating slowly
3 short beeps
—
SPORT
MODE
5) SET (S) Button
Button used to navigate, adjust or re-
set gauge multifunction display.
In order to memorize settings, engine
must be running.
NOTE: SET (S) button on the multi-
function switch has the same func-
tions and can also be used.
4 short
E-TEC: Injection oil level is low. Stop vehicle in a safe
place then, replenish injection oil reservoir.
Low fuel level. One (1) bar left in fuel level display.
—
Replenish fuel tank as soon as possible.
Reverse is selected.
Reverse did not engage, try again.
—
High beam headlights are selected.
E-TEC: Engine and/or injection oil need to warm-up
—
before normal operation. The engine's RPM is limited
until desired temperature is reached.
—
ECO mode is selected.
—
Standard mode is selected.
—
Sport mode is selected.
_______________
CONTROLS/INSTRUMENTS/EQUIPMENT
DESCRIPTION
ACE
51