Lynx Rave 600 ACE 2017 Operator's Manual page 57

2) Tachometer (RPM)
Measures engine
minute (RPM). Multiply by 1000 to ob-
tain the actual revolutions.
mmo2008-007-018
RH PORTION OF GAUGE
3) Multifunction Digital Display
mmo2007-009-066_u
MULTIFUNCTION ANALOG/DIGITAL GAUGE
1. Multifunction display
See table below for usual pilot lamps information. Refer to
TEM
for details on malfunction pilot lamps.
E-tec Models
PILOT
LAMP(S) BEEPER
ON
4 short
beeps
every
5 minutes
—
revolution per
MESSAGE
DISPLAY
E-TEC: Injection oil level is low. Stop vehicle in a
LOW OIL
safe place then, replenish injection oil reservoir.
Low fuel level. One (1) bar left in fuel level
—
display. Replenish fuel tank as soon as possible.
_______________
CONTROLS/INSTRUMENTS/EQUIPMENT
The multifunction display is used to:
– Display the WELCOME message
on power up
– Display the KEY recognition mes-
sage
– Provide various indications as se-
lected by the operator
– Activating or changing various func-
tions or modes of operation
– Display scrolling messages of func-
tion activation or system faults
– Display fault codes.
When the information center is first
powered up, the numerical display de-
faults to the last selected indication.
WARNING
Never adjust or set functions on
the multifunction gauge while rid-
ing the vehicle.
4) Pilot Lamps and Messages
mmo2008-003-024_a
TYPICAL — PILOT LAMPS
DESCRIPTION
MONITORING SYS-
55