Lynx Rave 600 ACE 2017 Operator's Manual page 116

MAINTENANCE SCHEDULE (E-TEC)
Clean and lubricate rewind starter
ENGINE
Inspect fuel pump strainer and replace if necessary
FUEL
SYSTEM
Inspect throttle cable
Replace brake fluid
DRIVE
Replace the following drive pulley wear parts: slider shoes, O-rings
SYSTEM
and sliding sheave bushing (E-TEC)
Check PPS2 bushing and bearing. Replace both if either one is worn.
SUSPENSION
E-TEC: Inspect oil pump strainer and clean if needed
ENGINE
Clean 3D rave valves
Replace the following drive pulley wear parts: spring cover bushing
DRIVE
and ramps (E-TEC)
SYSTEM
ELECTRICAL
E-TEC: Replace spark plugs
SYSTEM
Replace engine coolant
ENGINE
FUEL
Replace in-line fuel filter (E-TEC)
SYSTEM
______________
114
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
EVERY 10 000 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
EVERY 5 YEARS