Lynx Rave 600 ACE 2017 Operator's Manual page 101

"C"
50 to
75 mm No adjustment required
(2 to 3 in)
More than
Adjusted too soft, increase
75 mm
(3 in)
Less than
Adjusted too firm, decrease
50 mm
(2 in)
NOTE: If the specification is unattain-
able with the original springs, see an
authorized Lynx dealer for other avail-
able springs.
Electronic Damping Control (LEDC)
Rave RE Models - If Equipped
Damping controls the energy absorp-
tion when the shock absorber is being
increased or extended and controls
how fast the shock absorber returns
to its normal position. Lynx Electronic
Damping Control (by Tractive) allow to
adjust separately rear, center or skies
shocks.
To increase or decrease the damping
choose the shock you want to adjust by
pushing the left knob till the led lights
up in right position. Push the right knob
to set the damping. Upwards is more
damping and down is less damping.
WHAT TO DO
preload
preload
_______________
fmo2015-001-003_a
1. SKI - Skies shocks
2. CB - Center shock
3. RB - Rear shock
A. Left knob
B. Right knob
In the LEDC system it is also possible
to adjust the shape of damping curve
by mechanical adjusters. In all shocks
there are own adjusters for the low
speed (LS) and high speed (HS) damp-
ings. The speed means the velocity of
shock piston. If you want more/less
damping for low speed turn LS ad-
juster. In case you need more/less
damping for high speed turn HS ad-
juster. If you want to return standard
calibrations, close the adjuster totally
and then open 12 clicks. 12 clicks open
is standard setting for all shocks.
NOTE: When one of the LED's starts
blinking the controller is reporting an
error code. Contact an authorized Lynx
dealer and report which LED is blink-
ing.
TUNE YOUR RIDE
99