Lynx Rave 600 ACE 2017 Operator's Manual page 71

mmo2008-003-063_a
TYPICAL
1. Retaining pin
Lift rear portion of guard then release
from front tabs by pivoting the guard
outwards.
Drive Belt Guard Installation
When reinstalling belt guard, position
its cutaway toward front of snowmo-
bile.
Insert the tab into the slot and push it
into place
mmo2013-004-024_a
TYPICAL
1. Tab
Position the grommet over the retain-
ing rod. It may be necessary to slightly
lift the console to make room.
CONTROLS/INSTRUMENTS/EQUIPMENT
mmo2009-003-011_a
TYPICAL
1. Retaining rod
Position rear portion of the belt guard
over the retainer and secure it using
the retaining pin.
NOTE: Make sure rear portion of the
belt guard is properly positioned on the
stopper.
mmo2013-003-003_a
1. Retaining pin
_______________
69