Lynx Rave 600 ACE 2017 Operator's Manual page 104

TUNE YOUR RIDE
fmo2014-002-027_a
BLADE SKI
A. Light control -for deep snow riding
B. Standard - Trail riding
C. Stable control
fmo2016-001-002_a
BLADE DEEP SNOW SKI
A. Light control -for deep snow riding
B. Standard - Trail riding
C. Stable control
On these models, it is possible to set
the ski stance to two different width.
Recommend to use narrow ski stance.
When the spacer is installed inside the
ski leg, skis are set to the narrower
stance.
______________
102
fmo2014-003-009_a
1. Spacer on inside of ski leg
When the spacer is installed outside
the ski leg, skis are set to the wider
stance.
To change the ski stance, proceed as
follows on both sides:
1. Lift the front of vehicle.
2. Remove the ski bolt.
3. Place the spacer according to the
desired stance, see illustration.
fbg2013-009-002_b
PARTS LAYOUT - RH SIDE SHOWN
1. Ski leg
2. Ski runner
3. Ski stopper
4. Elastic Flanged Nut M10
5. Ski Axle
6. Models with adjustable stance
7. Bushings
8. Washer
9. Ski bolt (Hex. Cap Screw M10 x 100)
10. Flanged Nut M10