Lynx Rave 600 ACE 2017 Operator's Manual page 49

Depress switch as required to select
heating intensity to keep your hands at
a comfortable temperature.
E-TEC Models
mmo2014-004-001_d
VARIABLE INTENSITY
1. Heated grip switch
2. Increase heat
3. Decrease heat
The heating intensity is displayed via
the digital display.
NOTE: There are nine intensity set-
tings. When released, display will re-
turn to engine coolant temperature (if
equipped).
mmo2007-009-043_b
HEATING INTENSITY DISPLAY
1. Less heat
2. More heat
Heated grips will be in OFF position
when there are no bars displayed on
the gauge.
CONTROLS/INSTRUMENTS/EQUIPMENT
ACE Models
mmo2014-004-002_a
TYPICAL
1. Heated grip switch
2. Increase heat
3. Decrease heat
Heated Throttle Lever Switch
Models with Multifunction
Analog/Digital Gauge
E-TEC Models
NOTE: Under 2000 RPM, heated
throttle lever will be limited at 50%.
ACE Models
NOTE: Heated grips or throttle lever
are enabled above 1900 engine RPM.
Depress switch as required to select
heating intensity to keep your thumb
at a comfortable temperature.
mmo2014-004-001_e
VARIABLE INTENSITY
1. Heated throttle lever switch
2. Increase heat
3. Decrease heat
_______________
47