Lynx Rave 600 ACE 2017 Operator's Manual page 121

WARNING
Wipe off any oil spills. Oil is highly
flammable when heated.
Engine Oil Replacement
WARNING
The engine oil can be very hot.
Wait until engine oil is warm.
NOTICE
Engine oil and oil filter
must be replaced at the same time.
1. Place vehicle on a level surface.
2. Remove the LH side panel.
3. Remove the drive belt guard.
CONTROLS/INSTRU-
Refer to
MENTS/EQUIPMENT
4. Remove dipstick.
mmo2014-004-011_a
LH SIDE OF VEHICLE
1. Oil tank dipstick
5. From underneath the vehicle, ac-
cess the drain plug:
5.1 Remove one access cover re-
taining screw and loosen the
other.
5.2 Pivot the access cover to clear
the bottom pan opening.
section.
______________
MAINTENANCE PROCEDURES
fmo2014-002-015_a
1. Drain plugs access cover
fmo2014-002-015_c
PIVOT THE ACCESS COVER
1. Retaining screws
6. From underneath vehicle, clean
drain plug area.
fmo2016-003-012_a
1. Frame opening to reach drain plug
7. Place a drain pan under frame open-
ing.
119